+ 91-99920 -23536
|L.V. POWER SUPPLY AC/DC|
|Code:GP - 1007.1|
Suitable to provide 2 to 12 volts in step of 2 volts. Four 4mm socket terminals for AC and DC output sepaerately with fuse and indicator in ventilated painted steel cabinet.
|AC/DC LOW VOLTAGE POWER SUPPLY|
|Code:GP - 1009.1|
| Suitable to provide 2 to 12 volts in step of 2 volts, current 2A. Separate meter AC and DC are provided, voltage and current can be selected by a toggle switch and outputs are selected by a single front panel knob. Four 4mm colour coded safety sockets separately marked AC/DC. Protected with a circuit breaker slow blow fuse.
|Code: GP - 1011.2|
| Build electronic circuit easily with this prototyping tool. Contains a 7â€ťx4â€ť back plane with over 800 tie points and a power supply. When used with the Proto-Pak kits below, a complete unit in electronics can be taught.|
Output voltage : +5 VDC at 1Aa
+12 VDC at 250mA
-12 VDC at 250mA
Input voltage : 220 VAC, 50/Hz
|MIKEN 5 KV EHT SUPPLY|
|Code: GP - 1012.1|
| Output 100 to 5 Kv at 3mA continuous. Fully floating EHT circuits suitable for operation of spark, counters, discharge tubes etc. Provided variable output up to 5 KV. The EHT circuits are fully floating so that certain experiments the positive or negative terminals may be safely connected to earth.
The EHT output are taken from 4mm sockets and displayed on a 0 to 5 KV meter. Also on the front panel are a mains switch and indicator lamp. The main fuse is mounted on the back panel. In a robust metal case with feet, mains cable fitted by moulded connector. Cable and connector removable for storage. Workable on 220 V 50 HZ.
|L.T. POWER SUPPLY UNIT (D.C. Power Supply)|
|Code: GP - 1020.1|
| Provides output 0-15 volts d.c. at 1 Amp. Â± 10% a.c line variation and noise less than 2 mV RMS with 2 digital meters with overload and short circuit protection. The unit is housed in nicely painted metal case with carrying handle. Complete with main switch, fuse, indicator lamp and main cable etc. Power require 220 volts 50 Hz.
GP-1020.2 Same as Cat. No. 1020.1 but 0-15V 2A.
GP-1020.3 Same as Cat. No. 1020.1 but 0-30V 1A.
GP-1020.4 Same as Cat. No. 1020.1 but 0-30V 2A.
|Code: GP - 1023.1|
| - Voltage output 1,2,3,4,5,6,7,8,9,10 and 12Va.c. A.C. selectable from 2,4,6,8,12 volts tappings.
- Current output 6A continuous, 8A maximum up to 1 hour. Output is taken from central common and individual 2,4,6,8,12 volts AC sockets. Also mounted on the front panel are a mains switch, indicator lamp and fuse. In robust metal case 250x160x110mm high with mains cable fitted by moulded connector.
|SIGNAL GENERATOR 1 Hz to 100 K Hz|
|Code: GP - 1025.1|
| Sine, square and triangular waveform short circuit protection. High input impedance amplifier. Output 0-20 volts pk-pk at 50 ohms. A high power, robust, wide range signal generator providing sine, square and triangular waveforms. An instrument designed for a wide range of applications, with clear front panel layout for easy use.
Technical Data Frequency range 1 Hz to 100 K Hz in five decades and read on linearly calibrated scale. Accuracy Â± 2% on all ranges. Output sine, square and triangular waveforms. Amplitude control continuously variable from zero to maximum output. Attenuator 0.2, 2, 20 Volts.